Tractor winch is used in high-voltage transmission line circuit set up aerial and underground cable stuff, tractor winch can work in the messy condition, but motor cutter grinding operation must be correct, otherwise will show the risks, then how right operating motor cutter grinding it? Here to explain what we are. 1, using the front tractor winch, it is necessary to idle, according to the data to determine idle motor cutter grinding operation is not normal, concluded no problem, then the normal use. 2, tractor winch is necessary in the extra work load, overload is not allowed to use, prevent the onset of trouble or damage to the parts. 3, the orientation of the winch rope to be positive for the direction of the force to ensure that the rope traces smoothly, prevent overlapping rope winch tractors and adhere to a certain end tension. 4, prohibiting the shift when the clutch is not released, the ban lifting heavy rotation. 5, tractor winch operator will set the energy necessary to comply with the correct command, tractor winch pay attention to the working conditions of the various parts is not normal, safe traction when setting up a larger place in the end of the rope. 6, tractor winch chosen because some parts made of aluminum alloys in the repair process, the bolt can not be tightened too much, but can not use a hammer to prevent damage to the parts. 7, tractor winch to ensure operational reliability of the motor cutter grinding every 100 hours of operation should be carried out once a repair (two security) cleaning and oil changes, found problems in a timely manner to eliminate; every 200 hours of viewing time should be full disassembly, replacement of worn parts . Tractor winch winch is necessary to adhere to the fuel tank, air filter cleaning.

keywords: Tractor winch use,